仿真机械恐龙的安全标准你了解吗？

       仿真机械恐龙的制作工艺就是采用钢筋制作的骨架作为恐龙的支架来源www.bdsh5.com。并且用海绵或者泡沫进行立体切割加工，从而制作出恐龙的表皮层。可能很多朋友会问，为什么要这样做?，因为这样做出来的皮层是相当的弹性，更加逼真本.地.生.活.网。如果您需要栩栩如生地展示活体恐龙的话，它的内部结构就会要更加的复杂了。今天仿真机械恐龙出售小编就带大家了解一下仿真机械恐龙的安全标准本_地_生_活_网。
The manufacturing technology of the simulation mechanical dinosaur is to use the skeleton made of steel bar as the support of dinosaur. The sponge skin or foam was used to cut the epidermis of the dinosaurs. Maybe a lot of friends will ask, why do you do this? Because the cortex is quite elastic and more lifelike. If you need to show a living dinosaur vividly, its internal structure will be more complex. Today, the sales of simulation mechanical dinosaurs will take you to understand the safety standards of simulation mechanical dinosaurs.
       仿真机械恐龙和仿真大象都是一样的制作工艺，内部骨架，设计人员根据真实的恐龙和动物（例如大象）骨架比例，采用钢架焊接制作，然后外面再覆盖一层高密度专海绵作为肌肉，然后由美工手工雕刻出整个动物的外形和皮肤纹理细节，有毛发的动物，用人造皮毛手工粘贴上，仿真机械恐龙的话最后还要喷一属层硅胶，使肌肉更有韧性和防水，最后是喷漆上色，晾干！
The simulation mechanical dinosaur and the simulation elephant are the same production process. The internal skeleton is welded by the designer according to the real proportion of dinosaur and animal (such as elephant) skeleton, and then covered with a layer of high-density specialized sponge as muscle. Then the artist carves out the whole animal's shape and skin texture details by hand. For animals with hair, artificial skin is used The hair is pasted by hand, and a layer of silica gel is sprayed at last to make the muscle more flexible and waterproof. Finally, the paint is painted and dried!
       一、物理载重量要满足5-18岁消费者的需求,最小载重不低于150公斤。最高高度控制在2米以下,最大的运动幅度控制在30度安全标准以内来源www.bdsh5.com。
1、 The physical load shall meet the needs of consumers aged 5-18, with the minimum load not less than 150 kg. The maximum height is controlled below 2m, and the maximum movement range is controlled within 30 degree safety standard.
       二、仿真机械恐龙坐骑制作钢架应使用国标,同时要满足使用过程中的高载重高强度高扭力的三高安全标准,并且要求外表无尖锐物。
2、 The steel frame of the simulation mechanical dinosaur mount should use the national standard, and meet the three high safety standards of high load, high strength and high torque in the process of use, and the appearance should be free of sharp objects.
       三、内部电缆制作选用的是有检验合格的正规供应商,同时需要经过国家质检的铜(铝)芯线,避免因为内部电缆质量问题造成短路来源www.bdsh5.com。
3、 The internal cable is manufactured by the regular supplier with qualified inspection, and the copper (aluminum) core wire that needs to pass the national quality inspection is also selected to avoid short circuit caused by the internal cable quality problem.
       四、仿真机械恐龙坐骑制作所使用的表皮,需要选用为酸性无毒硅酮胶原材料为安全标准 ,在出厂半个月后有毒气体应挥发完毕;
4、 The skin used in the manufacture of the simulation mechanical dinosaur mount needs to be made of acid non-toxic silicone collagen material as the safety standard, and the toxic gas should be volatilized half a month after leaving the factory;
       五、机械传动装置、行程定位及限位装置, 需 要经过仔细计算在合理安全标准范围内。避免使用过程中出现机械轴断裂或者卡住;
5、 The mechanical transmission device, stroke positioning and limit device need to be carefully calculated within the range of reasonable safety standards. Avoid mechanical shaft fracture or jamming during use;
       六、仿真机械恐龙坐骑制作所有内部电路做到99.9%绝缘处理,外露部分线头使用热缩管或者绕线管进行包裹,满足中国地区的游乐设备安全标准b d s h 5 c o m。
6、 All internal circuits of the simulation mechanical dinosaur mount shall be insulated by 99.9%, and the exposed part shall be wrapped by heat shrinkable tube or winding tube, so as to meet the safety standards of amusement equipment in China.
      七、设置三个以上的启停开关,包括遥控启停、游客自行启停,强制启停开关;
7、 More than three start and stop switches are set, including remote control start and stop, tourists' self start and stop, and forced start and stop;
      相信大家看完以上内容以后，应该对仿真机械恐龙的安全标准有所了解了吧，希望会对大家有所帮助吧。
I believe that after reading the above content, you should have some understanding of the safety standards of the simulation mechanical dinosaur, and hope it will help you.
     本文词标签：仿真机械恐龙出售
     本文链接地址：http://www.jnklcz.com/a/news/457.html